Mapeproof™ AL Pro

Mapeproof™ AL PRO: an adhesive waterproofing membrane that provides integral bonding to poured concrete. This high-performance solution safeguards below-grade structures from water intrusion and lateral water migration. With its convenient adhesive side laps, it forms watertight seals for horizontal slabs and vertical blindside applications. Mapeproof™ AL PRO offers excellent durability, hydrostatic head resistance, and protection against wet/dry cycling and ponding water. It is also chemically resistant, protects against gas vapor intrusion, and is environmentally friendly. 

Mapeproof™ SW

Mapeproof SW waterproofing membrane is a reliable solution for horizontal slabs, vertical blindside, and backfilled wall applications. It contains sodium bentonite enclosed in polypropylene geotextile fabrics, which swells upon contact with water and creates a waterproof barrier. Its high swelling index prevents water intrusion, while the special additive mitigates the effects of salt and contaminated water. Mapeproof SW is self-healing, can be installed over damp or green concrete, and is unaffected by fluctuations in the water table.

Mapeproof™ AL Detail Tape

Mapeproof™ AL Detail Tape: the ultimate solution for watertight details in complex job sites. This tape is designed to bond to concrete and prevent lateral water migration. It forms a strong and continuous adhesive bond to Mapeproof™ AL, ensuring maximum protection. Mapeproof™ AL Detail Tape is flexible and easy to apply, making it perfect for achieving watertight details. Its multi-layer design enhances durability, allowing for foot traffic. 

Mapethene™ LT60

Mapethene™ LT60 membrane is a versatile solution that combines a rubberized adhesive with an HDPE layer to create a robust barrier against moisture, water, and gas. Ideal for installations in low-temperature environments ranging from 25°F to 60°F (-4°C to 16°C). For high-temperature applications, consider Mapethene™ HT60.

​

​

​

​

Mapethene™ HT60

Mapethene™ HT60 membrane: a high-temperature solution combining rubberized adhesive with an HDPE layer. This specialized formulation acts as a barrier against moisture, water, and gas. With cold application, it offers excellent flexibility, adhesion, and chemical resistance. Perfect for installations above 40°F (5°C). (For low temp, see Mapethene™ LT60).

​

​

Mapeseal™ GC

Mapeseal™ GC: a fast-curing, 100%-solids, cold-fluid-applied, single-component, and VOC-compliant waterproofing membrane. With advanced technology, it's suitable for vertical, horizontal, and green concrete surfaces. Low in odor and suitable for occupied spaces, it can be applied by roller, brush, trowel, or squeegee. For critical applications, it can be reinforced with Mapeseal™ Fabric.

Mapethene™ LT60 / HT60

Mapethene™ LT60 / HT60: Low-VOC Solvent-Based Adhesive Primer. This specially formulated primer promotes excellent adhesion for Polyglass waterproofing membranes. With its quick-drying and high-tack properties, it ensures maximum performance.

​

​

​

Mapeseal™ GC

Mapeseal™ GC: quick-drying, water-based, high-tack adhesive primer specially formulated for maximum adhesion with Polyglass waterproofing membranes. With low VOC, low odor, and aggressive tack, this primer is ready to use with no mixing required. Ideal for both vertical and horizontal applications, it is perfect for attaching Mapedrain™ drainage composites to Mapethene™ and Mapeseal™ GC.

Mapeprime™ S710

Mapeprime™ S710: quick-drying, high-tack adhesive primer - designed explicitly for maximum adhesion with Polyglass waterproofing membranes. With low VOCs compliant with most state and local regulations, it's easy to use and requires no mixing or dilution. Ideal for both vertical and horizontal applications, it's versatile and works at temperatures as low as 25°F (-4°C).

​

​

​

​

Mapeprime™ 720 W

Mapeprime™ 720 W: Quick-drying, water-based, high-tack adhesive primer - the perfect solution for maximum adhesion with Polyglass waterproofing membranes. With a low VOC, low odor formulation, it dries quickly and offers aggressive tack for improved adhesion. It's ready to use right out of the container, with no mixing or dilution required. This water-based and nonflammable primer is suitable for both vertical and horizontal applications, making it ideal for attaching Mapedrain™ drainage composites to Mapethene™ and Mapeseal™ GC.

Mapeproof™ Liquid Membrane

Mapeproof™ Liquid Membrane: A thixotropic, solvent-free, trowel-grade two-component solution, designed for use with Polyglass waterproofing membranes. It forms a flexible detail accessory to prevent water ingress and migration in critical areas, offering unique sag resistance and extended pot life for complex applications. Perfect for sealing, filling, or detailing Mapeproof™ AL or Mapethene™ LT60 / HT60 Membranes, it's ideal for various applications including fillets, pile heads, wall terminations, repairs, and transitions.

​

​

Mapestrip™ 25

Mapestrip™ 25: A hydrophilic rubber strip with an acrylic polymer base that creates watertight construction joints. Ideal for horizontal and vertical joints and penetrations through slabs and walls, it boasts controlled volumetric expansion, reducing the risk of concrete spalling. With uniform volumetric expansion up to 120%, simple overlap jointing, and reproducible swell after wet, dry cycling, it's the perfect solution for your construction needs. Additionally, it does not contain bentonite and is unaffected by freeze-thaw cycles. Available in rolls of ¾” x 1″ x 16.4′ (20 mm x 25 mm x 5 m).

Mapedrain HS

Mapedrain HS: The solution for hydrostatic relief and prevention of soil or sand particle passage. Lightweight and easy to install, it eliminates the need for aggregate backfill, providing cost savings. This product features a polymeric protective film on the back to offer additional protection to waterproofing membranes. Additionally, Mapedrain HS serves as a protection course for Polyglass below-grade waterproofing membranes.

​

Mapeproof™ Granules

Mapeproof Granules: Made with sodium bentonite clay, which hydrates and swells in the presence of moisture to create a waterproofing membrane. Perfect for cost-sensitive horizontal slabs and vertical blindside applications, it has a high swelling index to effectively lock out moisture. It can be installed over damp or green concrete and is self-healing if punctured. With no concerns about changes in the water table, it's suitable for vertical applications and has 0 VOCs.

Mapeproof™ HW

Mapeproof HW: Waterproofing membrane - a reliable solution composed of sodium bentonite encapsulated between woven and nonwoven polypropylene geotextile fabrics. The sodium bentonite clay is mechanically locked in place with thousands of fibers, which hydrate and swell in the presence of water, forming a waterproofing membrane. Perfect for horizontal slabs, vertical blindside, and backfilled walls applications, it offers exceptional waterproofing performance for all your needs.

​

Mapeproof™ Sealant

Mapeproof Sealant: A trowel-grade sealant made with sodium bentonite clay and specialized polymers, designed as a detailing accessory to complement Mapeproof HW and Mapeproof SW waterproofing membranes. This sealant utilizes sodium bentonite-based technology, swelling upon contact with water to effectively seal against water intrusion. With easy application and excellent substrate bonding, it is ideal for various detailing applications, forming a seamless waterproofing system when used with Mapeproof HW or Mapeproof SW.

Mapestrip™ 25B

Mapestrip 25B is a sodium bentonite based hydrophilic rubber strip specially designed to form watertight construction joints. The sodium bentonite swells when it encounters water to seal against leaks. Mapestrip 25B is ideal for variety of applications, including horizontal and vertical construction joints, through wall and slab penetrations, and transitions.

Mapedrain™️ Simple Drain System

Mapedrain Simple Drain System is a complete offering of modular 3-dimensional, high-flow, polypropylene drainage channels for easy on-site water collection.

Mapeseal™️ LMR Fabric

Mapeseal LMR Fabric is a white, spunbond non-woven polyester fabric used in the
reinforcing of the Mapeseal GC waterproofing system. The flexible fabric allows for ease of application.